Jump to content

SJC Industries Unveils Breakthrough Ambulance Design


Recommended Posts

http://www.emsresponder.com/features/artic...=11&id=7394

http://www.jems.com/Images/SJC%20Industrie...cm16-130110.pdf

Press Release

SJC Industries Corp.

At the Fire Department Instructors Conference, SJC Industries Corp., manufacturer of McCoy Miller, Marque and Premiere brand of ambulances, demonstrated their leadership in design and engineering by unveiling a new concept Side-Load ambulance.

The vehicle was built to address safety challenges present in today's ambulance market. An article published in 2003 by the CDC (Centers for Disease Control and Prevention) titled 'Ambulance Crash-Related Injuries Among Emergency Medical Services Workers --- United States, 1991--2002' called for manufacturers to take action. In that article it states, "Ambulance manufacturers should evaluate and develop occupant protection systems designed to increase the crash survivability of EMS workers and patients in ambulance patient compartments and ensure that such systems allow EMS workers mobility to access patients and equipment. " This new design by SJC Industries Corp has responded to this call for occupant protection.

SJC's Side-Load design repositions the patient and attendants, delivering the following features with resulting benefits:

* Eliminates side-facing seating positions - Research and testing has shown that personnel in side-facing seating positions, such as squad benches and CPR seats, are subjected more to serious injury or death, even when seat belted, than personnel in a frontward or rearward seating positions.

* Reduces cabinets and obstructions in head strike zones, which eliminates potential debilitating injuries.

* Designs seating positions to give attendants access to the patient and controls while remaining seat-belted.

* In the event of a frontal accident, provides the potential for an evenly applied force along the length of the patient thereby reducing isolated strain points.

The new Side-Load design uses high back seats with 5-point safety harnesses in all seating positions. These chairs move side-to-side following the length of the cot, and telescope forward and backward using aircraft quality materials. This provides access to the patient and controls while remaining properly restrained. An outboard mounted bench style forward facing high-back seat incorporates a child safety seat with 5-point safety harness.

The design of this ambulance incorporates two extra-wide sliding side doors, thus allowing egress to the patient from either the street side or curbside. Sliding doors offer less obstruction at emergency scenes or in garages and are less likely affected in windy situations.

Storage of medical supplies is achieved by the use of sliding drawers that are recessed into the rear partition and held in the closed or open position with the aid of gas struts. This design has eliminated many head strike zone obstructions. Any remaining cabinets are heavily padded with high-density foam cushions. Electrical controls and oxygen delivery systems are located on both sides of the patient compartment, giving attendants access needed while remaining seat-belted. This new design also provides increased exterior storage at the rear of the vehicle for rescue gear, bunker gear, stokes basket or other extrication and patient care equipment.

Using a Ferno-Washington Stat-Trac cot mount provides a cot anchorage system, which has been tested to a 20 G force. By locating the patient laterally, the force of a frontal impact is potentially evenly distributed along the entire length of the patient. Traditional positioning of patients is prone to applied isolated force to the neck and shoulder regions. Crash tests have demonstrated that should a patient be loosely restrained in a traditional cot orientation they will "submarine" towards the front of the vehicle injuring both the patient and attendant.

The Side-Load uses the latest technology in LED exterior warning and interior lights. This provides increased lumens while reducing amperage requirements and extending service life. The high capacity HVAC system is ducted through the ceiling, providing affective and adjustable delivery of conditioned air to the patient.

This concept vehicle will be traveling to many of the major EMS shows across the country in the coming months. End user comments will be catalogued for analysis and consideration as future generations of this unique concept vehicle are designed.

For further information please contact Bob Parks, Product Manager at 800-326-2062.

Link to comment
Share on other sites

Repost...

http://www.emtcity.com/index.php?showtopic=11866

I remember seeing this a while ago. There's a huge problem with it. Most ambulance bays are set up with ambulances parked parallel to each other. So, once you're parked you can't get the patient out of the ambulance. Another problem that people saw was that if you're on scene of an MVC, you will be loading the patient while standing in the lane next to the ambulance instead of the same lane the ambulance is in.

Link to comment
Share on other sites

I remember seeing this a while ago. There's a huge problem with it. Most ambulance bays are set up with ambulances parked parallel to each other. So, once you're parked you can't get the patient out of the ambulance. Another problem that people saw was that if you're on scene of an MVC, you will be loading the patient while standing in the lane next to the ambulance instead of the same lane the ambulance is in.

I liked it right up until a friend pointed that out.

Link to comment
Share on other sites

This thread is quite old. Please consider starting a new thread rather than reviving this one.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...